FLEXBOOL PB
FLEXBOOL PLC model PB supports up to 32 Power Bus extenders (2-Wire, Power + Data). The controller itself provides 16 I/O (4 Digital Inputs, 4 Analog Inputs, 4 Digital Outputs, and 4 Relay Outputs). It can operate as a stand-alone system controller, as well as a part of another system.
FLEXBOOL PB is Arduino IDE compaible.
FLEXBOOL PB is Arduino IDE compaible.
16 Inputs/Outputs. Pluggable terminals
Over-Voltage, Over-Current I/O protection
4 x Digital Inputs (up to 30VDC)
4 x Analog Inputs (0-10V)
4 x Digital Outputs (200mA)
4 x Relay Outputs (3A)
Voltage reference outputs (3.3V, 5V)
Power BUS Extenders
Easy & intuitive programming
No License limitations
Over-Voltage, Over-Current I/O protection
4 x Digital Inputs (up to 30VDC)
4 x Analog Inputs (0-10V)
4 x Digital Outputs (200mA)
4 x Relay Outputs (3A)
Voltage reference outputs (3.3V, 5V)
Power BUS Extenders
Easy & intuitive programming
No License limitations
Dual-Core processor
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
SD Memory Card support
Full-color display
Output Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
Ready to Use program examples
Arduino IDE compatible
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
SD Memory Card support
Full-color display
Output Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
Ready to Use program examples
Arduino IDE compatible
| MCU | |
| Model: | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency: | up to 240 MHz |
| SRAM: | 520 KB |
| ROM: | 448 KB |
| FLASH: | 16 MB |
| DIGITAL INPUTS | |
| Number of channels: | 4 (independent) |
| Max. voltage: | 30VDC |
| Protection: | Over-voltage, over-current |
| Interrupts: | Yes |
| ANALOG INPUTS (0-10V) | |
| Number of channels: | 4 (independent) |
| Input range: | 0-10V |
| ADC resolution: | 12 bit |
| Protection: | Over-voltage, over-current |
| Input Impedance: | 150kOhm |
| Measuring accuracy: | 0.01V (0.05-10V) |
| DIGITAL OUTPUTS | |
| Number of channels: | 4 (independent) |
| Max. current: | 200mA | Protection: | Over-current |
| RELAY OUTPUTS | |
| Number of channels: | 4 |
| Max. current: | 3A (resistive load) |
| Contact arrangement: | SPST (common line) |
| Max. Switching Voltage: | 30VDC, 400VAC |
| Operate Time (typical): | 8ms |
| Release Time (typical): | 4ms |
| DC OUTPUTS | |
| 5V DC | Protected, 0.5A max. |
| 3.3V DC | Protected, 0.5A max. |
| Vout | Protected, 1A max. |
| * When UPS battery is used, the 5V, 3.3V and Vout are uninterruptible supply outputs. Vout is equal to the PLC Supply voltage (uninterruptible, non-stabilized, over-current protected). | |
| POWER BUS EXTENDERS | Bus Type: | Power Bus (Power + Data) |
| Bus Wiring: | 2-Wire, daisy chain |
| Max. Extenders: | 32 |
| Max. Bus Length: | 500 meters |
| Protocol: | Modbus RTU | Response Time: | 24ms/Extender |
| MECHANICAL | |
| Dimensions: | 54x106x62mm |
| Enclosure: | ABS, Grey RAL 7035 |
| Terminals: | Pluggable, 0.4Nm, 2.5mm2 max. |
| Mounting: | DIN Rail (EN 60715) |
| Weight: | 190g |
| Impact resistance: | IK07(EN 62262) |
| Shock resistance: | 80m/s2, X, Y, Z directions, 2 times |
| SD MEMORY CARD | |
| Card Type: | Micro SD |
| Holder Type: | Push In, Push Out |
| Communication: | SPI |
| Max. Card Capacity: | 16GB |
| DISPLAY | |
| Display Type: | TFT |
| Display Size: | 1.3'' |
| Display Resolution: | 240x240px |
| Color: | Full color (64k) |
| Communication: | SPI |
| Display Controller: | ST7789 |
| POWER SUPPLY | |
| Supply Range: | 11-30VDC |
| Power consumption: | Idle: 1.5W, Max: 3.4W |
| Protection | Over-voltage, reverse polarity |
| * 15VDC and higher PLC supply voltage is recommended when Power Bus extenders are in use. | |
| ETHERNET | |
| Data rate: | 10/100Mbps (Fast Ethernet) |
| Features: | Auto-negotiation, Half/Full Duplex, HP Auto-MDIX Support |
| Ethernet port: | Shielded RJ45. Integrated magnetics. Link Status & 10/100Mbps Indicators |
| WiFi | |
| WiFi Standards: | 802.11b/g/n |
| Features: | WMM, 4 × virtual Wi-Fi interfaces, Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes. |
| Frequency band: | 2.4GHz |
| Data rate: | up to 150Mbps |
| Output power: | up to 20.5dBm |
| BLUETOOTH | |
| Protocols: | Bluetooth v4.2 BR/EDR and BLE |
| Receiver: | NZIF with –97dBm sensitivity |
| Transmitter: | Class-1, class-2 and class-3 |
| RS485 | |
| Data rate: | up to 500Kbps |
| Features: | Auto Direction Control, Enhanced Slew-Rate Limiting |
| Protection: | ESD protection, Output Current Limit and Thermal Shutdown |
| UART | |
| Data rate: | up to 500Kbps |
| Logic level: | 3.3V |
| ENVIRONMENTAL | |
| Storage temperature: | -30 – 65 o C |
| Operation temperature: | -20 – 60 o C |
| Operation humidity (25 o C): | 10 – 85%RH, non-condensing |
| FLEXBOOL PB
|
FLEXBOOL 3
|
FLEXBOOL 2
|
FLEXBOOL Lite
|
|
| MCU | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency | up to 240 MHz | up to 240 MHz | up to 240 MHz | up to 240 MHz |
| SRAM | 520 KB | 520 KB | 520 KB | 520 KB |
| ROM | 448 KB | 448 KB | 448 KB | 448 KB |
| FLASH | 16MB | 16MB | 16MB | 16MB |
| Real Time Clock | X | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz |
| Display | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) |
| SD Memory Card | ✓ | ✓ | ✓ | ✓ |
| UPS Battery Charger | X | ✓ | X | ✓ |
| EXT Connector (Top) | X | ✓ | ✓ | ✓ |
| Pluggable Terminals | ✓ | ✓ | ✓ | ✓ |
| USB-C | ✓ | ✓ | ✓ | ✓ |
| Power BUS Extenders | ✓ | X | X | X |
| RS485 | ✓ | ✓ | ✓ | ✓ |
| UART | ✓ | ✓ | ✓ | ✓ |
| Ethernet | ✓ | ✓ | ✓ | ✓ |
| WiFi | ✓ | ✓ | ✓ | ✓ |
| Bluetooth | ✓ | ✓ | ✓ | ✓ |
| SPI | Internal Only | ✓ | ✓ | ✓ |
| I2C | Internal Only | ✓ | ✓ | ✓ |
| Digital Inputs | 4 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) |
| Analog Inputs | 4 (0-10V) | 8 (0-10V) | 8 (0-10V) | 8 (0-10.0V) |
| Thermistor Inputs | on PB Extenders | 8 (1-10k, NTC) | 8 (1-10k, NTC) | X |
| RTD Inputs | on PB Extenders | 8 (PT100, Cu100, Cu50) | X | X |
| Current Inputs | on PB Extenders | 8 (0-25mA) | X | X |
| Digital Outputs | 4 (200mA) | 8 (200mA) | 8 (200mA) | X |
| Relay Outputs | 4 (SPST), 3A | 8 (3xSPDT + 5xSPST), 5A | 8 (3xSPDT, 10A + 5xSPST, 5A) | 8 (3xSPDT + 5xSPST), 5A |
| Analog Outputs | X | 8 (0-10V) | X | X |
| PWM Outputs | X | 8 (0-100%) | X | X |
| DC Outputs | ✓ | ✓ | ✓ | ✓ |
| Channel Indicators | ✓ | ✓ | ✓ | ✓ |
| Process Indicators | X | X | X | 24 (Dual-Color) |
| Dimensions | 54x106x62mm | 160x106x62mm | 107x106x62mm | 160x106x62mm |
| Weight | 190g | 460g | 310g | 380g |
Depending on your location, you can order from our online store, or you can buy from a distributor. In both cases, all our products come with a standard warranty and you receive reliable technical support from our Technical Center. Choose your location to find the best devivery option.
FLEXBOOL 3
FLEXBOOL 3 provides wide I/O standards support and good communication capabilities. It can operate as a stand-alone system controller, as well as part of another system. FLEXBOOL 3 is based on the dual-core ESP32 processor and fully compatible with Arduino IDE.
72 Inputs/Outputs. Pluggable terminals
Built In Smart Battery Charger (CC, CV, UPS)
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x Current Inputs (0-20mA)
8 x RTD Inputs (PT100, PT46, Cu100, Cu50)
8 x NTC Inputs (thermistors 1-10k)
8 x Digital Outputs (200mA)
8 x Relay Outputs (5A)
8 x PWM Outputs (configurable frequency)
8 x Analog Outputs (0-10V)
Voltage reference outputs (3.3V, 5V)
Built In Smart Battery Charger (CC, CV, UPS)
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x Current Inputs (0-20mA)
8 x RTD Inputs (PT100, PT46, Cu100, Cu50)
8 x NTC Inputs (thermistors 1-10k)
8 x Digital Outputs (200mA)
8 x Relay Outputs (5A)
8 x PWM Outputs (configurable frequency)
8 x Analog Outputs (0-10V)
Voltage reference outputs (3.3V, 5V)
Dual-Core processor
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
Easy & intuitive programming
EXT / Development boards connector
No License limitations
Ready to Use program examples
Arduino IDE compatible
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
Easy & intuitive programming
EXT / Development boards connector
No License limitations
Ready to Use program examples
Arduino IDE compatible
| MCU | |
| Model: | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency: | up to 240 MHz |
| SRAM: | 520 KB |
| ROM: | 448 KB |
| FLASH: | 16 MB |
| DIGITAL INPUTS | |
| Number of channels: | 8 (independent) |
| Max. voltage: | 30VDC |
| Protection: | Over-voltage, over-current |
| Interrupts: | Yes |
| ANALOG INPUTS (0-10V) | |
| Number of channels: | 8 (independent) |
| Input range: | 0-10V |
| ADC resolution: | 12 bit |
| Protection: | Over-voltage, over-current |
| Input Impedance: | 150kOhm |
| Measuring accuracy: | 0.01V (0.05-10V) |
| CURRENT INPUTS (4-20mA) | |
| Number of channels: | 8 (independent) |
| Input range: | 0-25mA |
| ADC resolution: | 12 bit |
| Protection: | Over-voltage, over-current |
| Measuring accuracy: | 0.01mA (0.05-20mA) |
| THERMISTOR INPUTS | |
| Number of channels: | 8 (independent) |
| Supported sensors: | NTC, 1-10k |
| ADC resolution: | 12 bit |
| Range: | -40 - +150oC |
| Measuring accuracy: | 1oC |
| Protection: | Over-voltage |
| RTD INPUTS | |
| Number of channels: | 8 (independent) |
| Supported sensors: | PT100, PT46, Cu100, Cu50 |
| Connection: | 2-Wire/3-Wire |
| ADC resolution: | 16 bit |
| Range: | -200 - +650oC | Measuring accuracy: | 0.2% |
| Protection: | Over-voltage |
| DIGITAL OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 200mA | Protection: | Over-current |
| PWM OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 10mA |
| PWM Frequency: | Configurable (50-1000Hz) |
| Range: | 0-100% |
| Pulse Width resolution: | 1% |
| Protection: | Over-current |
| ANALOG OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 10mA |
| Output range: | 0-10V |
| DAC Resolution: | 12 bit |
| Protection: | Over-current |
| Accuracy: | 0.01V |
| RELAY OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 5A (resistive load) |
| Contact arrangement: | 3xSPDT, 5xSPST |
| Max. Switching Voltage: | 30VDC, 400VAC |
| Operate Time (typical): | 8ms |
| Release Time (typical): | 4ms |
| EXT I/O | |
| Number of channels: | 2 (independent) |
| Logic Level: | 3.3V |
| Protection: | Over-voltage, Over-current |
| Interrupts: | Yes |
| DC OUTPUTS | |
| 5V DC | Protected, 0.5A max. |
| 3.3V DC | Protected, 0.5A max. |
| Vout | Protected, 1A max. |
| * When UPS battery is used, the 5V, 3.3V and Vout are uninterruptible supply outputs. Vout is equal to the PLC Supply voltage (uninterruptible, non-stabilized, over-current protected). | |
| REAL TIME CLOCK | |
| Available Data: | Hours, Minutes, Seconds, Day of Week, Day, Month, Year. |
| Calendar operation: | Auto-adjustment for months with fewer than 31 days and leap years. |
| Oscilator | Crystal, 32.768 kHz |
| BackUp Supply: | Capacitive, up to 10 days |
| SD MEMORY CARD | |
| Card Type: | Micro SD |
| Holder Type: | Push In, Push Out |
| Communication: | SPI |
| Max. Card Capacity: | 16GB |
| DISPLAY | |
| Display Type: | TFT |
| Display Size: | 1.3'' |
| Display Resolution: | 240x240px |
| Color: | Full color (64k) |
| Communication: | SPI |
| Display Controller: | ST7789 |
| POWER SUPPLY | |
| Supply Range: | 11-30VDC |
| Power consumption: | Idle: 1.5W, Max: 3.4W |
| Protection | Over-voltage, reverse polarity |
| * When the UPS battery charger is in use, the PLC power supply voltage must match the battery voltage as follows: 14.4VDC (recommended for 12V battery), or 28.8VDC (recommended for 24V battery). | |
| UPS BATTERY CHARGER | |
| UPS functionality: | Yes |
| Charging Modes: | CC, CV (Norm, Absorb, Equalize) |
| Supported battery types: | Lead-Acid, AGM batteries |
| Battery voltage: | User configurable 12, or 24V | Max. Charging Current: | User configurable 0 to 1.00A |
| Charger Telemetry: | Charging mode & state. All voltage, current & temperature values. |
| Protection: | Over-voltage, over-current, reverse polarity (In/BAT), over-temperature. |
| BATT Temperature Sensor: | NTC 10k, B=3490 (included) |
| ETHERNET | |
| Data rate: | 10/100Mbps (Fast Ethernet) |
| Features: | Auto-negotiation, Half/Full Duplex, HP Auto-MDIX Support |
| Ethernet port: | Shielded RJ45. Integrated magnetics. Link Status & 10/100Mbps Indicators |
| WiFi | |
| WiFi Standards: | 802.11b/g/n |
| Features: | WMM, 4 × virtual Wi-Fi interfaces, Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes. |
| Frequency band: | 2.4GHz |
| Data rate: | up to 150Mbps |
| Output power: | up to 20.5dBm |
| BLUETOOTH | |
| Protocols: | Bluetooth v4.2 BR/EDR and BLE |
| Receiver: | NZIF with –97dBm sensitivity |
| Transmitter: | Class-1, class-2 and class-3 |
| RS485 | |
| Data rate: | up to 500Kbps |
| Features: | Auto Direction Control, Enhanced Slew-Rate Limiting |
| Protection: | ESD protection, Output Current Limit and Thermal Shutdown |
| UART | |
| Data rate: | up to 500Kbps |
| Logic level: | 3.3V |
| SPI | |
| Frequency: | up to 80MHz |
| Logic level: | 3.3V |
| I2C | |
| Frequency: | 400kHz |
| Logic level: | 3.3V |
| MECHANICAL | |
| Dimensions: | 160x106x62mm |
| Enclosure: | ABS, Grey RAL 7035 |
| Terminals: | Pluggable, 0.4Nm, 2.5mm2 max. |
| Mounting: | DIN Rail (EN 60715) |
| Weight: | 460g |
| Impact resistance: | IK07(EN 62262) |
| Shock resistance: | 80m/s2, X, Y, Z directions, 2 times |
| ENVIRONMENTAL | |
| Storage temperature: | -30 – 65 o C |
| Operation temperature: | -20 – 60 o C |
| Operation humidity (25 o C): | 10 – 85%RH, non-condensing |
| FLEXBOOL PB
|
FLEXBOOL 3
|
FLEXBOOL 2
|
FLEXBOOL Lite
|
|
| MCU | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency | up to 240 MHz | up to 240 MHz | up to 240 MHz | up to 240 MHz |
| SRAM | 520 KB | 520 KB | 520 KB | 520 KB |
| ROM | 448 KB | 448 KB | 448 KB | 448 KB |
| FLASH | 16MB | 16MB | 16MB | 16MB |
| Real Time Clock | X | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz |
| Display | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) |
| SD Memory Card | ✓ | ✓ | ✓ | ✓ |
| UPS Battery Charger | X | ✓ | X | ✓ |
| EXT Connector (Top) | X | ✓ | ✓ | ✓ |
| Pluggable Terminals | ✓ | ✓ | ✓ | ✓ |
| USB-C | ✓ | ✓ | ✓ | ✓ |
| Power BUS Extenders | ✓ | X | X | X |
| RS485 | ✓ | ✓ | ✓ | ✓ |
| UART | ✓ | ✓ | ✓ | ✓ |
| Ethernet | ✓ | ✓ | ✓ | ✓ |
| WiFi | ✓ | ✓ | ✓ | ✓ |
| Bluetooth | ✓ | ✓ | ✓ | ✓ |
| SPI | Internal Only | ✓ | ✓ | ✓ |
| I2C | Internal Only | ✓ | ✓ | ✓ |
| Digital Inputs | 4 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) |
| Analog Inputs | 4 (0-10V) | 8 (0-10V) | 8 (0-10V) | 8 (0-10.0V) |
| Thermistor Inputs | on PB Extenders | 8 (1-10k, NTC) | 8 (1-10k, NTC) | X |
| RTD Inputs | on PB Extenders | 8 (PT100, Cu100, Cu50) | X | X |
| Current Inputs | on PB Extenders | 8 (0-25mA) | X | X |
| Digital Outputs | 4 (200mA) | 8 (200mA) | 8 (200mA) | X |
| Relay Outputs | 4 (SPST), 3A | 8 (3xSPDT + 5xSPST), 5A | 8 (3xSPDT, 10A + 5xSPST, 5A) | 8 (3xSPDT + 5xSPST), 5A |
| Analog Outputs | X | 8 (0-10V) | X | X |
| PWM Outputs | X | 8 (0-100%) | X | X |
| DC Outputs | ✓ | ✓ | ✓ | ✓ |
| Channel Indicators | ✓ | ✓ | ✓ | ✓ |
| Process Indicators | X | X | X | 24 (Dual-Color) |
| Dimensions | 54x106x62mm | 160x106x62mm | 107x106x62mm | 160x106x62mm |
| Weight | 190g | 460g | 310g | 380g |
Depending on your location, you can order from our online store, or you can buy from a distributor. In both cases, all our products come with a standard warranty and you receive reliable technical support from our Technical Center. Choose your location to find the best devivery option.
FLEXBOOL 2
FLEXBOOL 2 is the compact member of the FLEXBOOL family. It provides all communication capabilities of FLEXBOOL 3 (Ethernet, RS485, UART, WiFi, Bluetooth) and standard I/O support - 8 Digital Inputs, 8 Analog Inputs, 8 user-configurable Thermistor Inputs, 8 Digital Outputs (200mA), and 8 Relay Outputs. As any other FLEXBOOL controller, FLEXBOOL 2 is based on the dual-core ESP32 processor and fully compatible with Arduino IDE.
40 Inputs/Outputs. Pluggable terminals
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x NTC Inputs (thermistors 1-10k)
8 x Digital Outputs (200mA)
8 x Relay Outputs (3x10A, 5x5A)
Voltage reference outputs (3.3V, 5V)
Easy & intuitive programming
EXT / Development boards connector
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x NTC Inputs (thermistors 1-10k)
8 x Digital Outputs (200mA)
8 x Relay Outputs (3x10A, 5x5A)
Voltage reference outputs (3.3V, 5V)
Easy & intuitive programming
EXT / Development boards connector
Dual-Core processor
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
No License limitations
Ready to Use program examples
Arduino IDE compatible
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED indicators
User-configurable panel buttons
Integrated Self-Test
No License limitations
Ready to Use program examples
Arduino IDE compatible
| MCU | |
| Model: | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency: | up to 240 MHz |
| SRAM: | 520 KB |
| ROM: | 448 KB |
| FLASH: | 16 MB |
| DIGITAL INPUTS | |
| Number of channels: | 8 (independent) |
| Max. voltage: | 30VDC |
| Protection: | Over-voltage, over-current |
| Interrupts: | Yes |
| ANALOG INPUTS (0-10V) | |
| Number of channels: | 8 (independent) |
| Input range: | 0-10V |
| ADC resolution: | 12 bit |
| Protection: | Over-voltage, over-current |
| Input Impedance: | 150kOhm |
| Measuring accuracy: | 0.01V (0.05-10V) |
| THERMISTOR INPUTS | |
| Number of channels: | 8 (independent) |
| Supported sensors: | NTC, 1-10k |
| ADC resolution: | 12 bit |
| Range: | -40 - +150oC |
| Measuring accuracy: | 1oC |
| Protection: | Over-voltage |
| DIGITAL OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 200mA | Protection: | Over-current |
| RELAY OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | R[0] - R[2]: 10A (resistive load) R[3] - R[7]: 5A (resistive load) |
| Contact arrangement: | 3xSPDT (10A), 5xSPST (5A) |
| Max. Switching Voltage: | 30VDC, 400VAC |
| Operate Time (typical): | 8ms |
| Release Time (typical): | 4ms |
| EXT I/O | |
| Number of channels: | 2 (independent) |
| Logic Level: | 3.3V |
| Protection: | Over-voltage, Over-current |
| Interrupts: | Yes |
| DC OUTPUTS | |
| 5V DC | Protected, 0.5A max. |
| 3.3V DC | Protected, 0.5A max. |
| Vout | Protected, 1A max. |
| * Vout is equal to the PLC Supply voltage (over-current protected). | |
| MECHANICAL | |
| Dimensions: | 107x106x62mm |
| Enclosure: | ABS, Grey RAL 7035 |
| Terminals: | Pluggable, 0.4Nm, 2.5mm2 max. |
| Mounting: | DIN Rail (EN 60715) |
| Weight: | 310g |
| Impact resistance: | IK07(EN 62262) |
| Shock resistance: | 80m/s2, X, Y, Z directions, 2 times |
| ENVIRONMENTAL | |
| Storage temperature: | -30 – 65 o C |
| Operation temperature: | -20 – 60 o C |
| Operation humidity (25 o C): | 10 – 85%RH, non-condensing |
| SD MEMORY CARD | |
| Card Type: | Micro SD |
| Holder Type: | Push In, Push Out |
| Communication: | SPI |
| Max. Card Capacity: | 16GB |
| DISPLAY | |
| Display Type: | TFT |
| Display Size: | 1.3'' |
| Display Resolution: | 240x240px |
| Color: | Full color (64k) |
| Communication: | SPI |
| Display Controller: | ST7789 |
| REAL TIME CLOCK | |
| Available Data: | Hours, Minutes, Seconds, Day of Week, Day, Month, Year. |
| Calendar operation: | Auto-adjustment for months with fewer than 31 days and leap years. |
| Oscilator | Crystal, 32.768 kHz |
| BackUp Supply: | Capacitive, up to 10 days |
| POWER SUPPLY | |
| Supply Range: | 11-30VDC |
| Power consumption: | Idle: 1.5W, Max: 3.4W |
| Protection | Over-voltage, reverse polarity |
| ETHERNET | |
| Data rate: | 10/100Mbps (Fast Ethernet) |
| Features: | Auto-negotiation, Half/Full Duplex, HP Auto-MDIX Support |
| Ethernet port: | Shielded RJ45. Integrated magnetics. Link Status & 10/100Mbps Indicators |
| WiFi | |
| WiFi Standards: | 802.11b/g/n |
| Features: | WMM, 4 × virtual Wi-Fi interfaces, Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes. |
| Frequency band: | 2.4GHz |
| Data rate: | up to 150Mbps |
| Output power: | up to 20.5dBm |
| BLUETOOTH | |
| Protocols: | Bluetooth v4.2 BR/EDR and BLE |
| Receiver: | NZIF with –97dBm sensitivity |
| Transmitter: | Class-1, class-2 and class-3 |
| RS485 | |
| Data rate: | up to 500Kbps |
| Features: | Auto Direction Control, Enhanced Slew-Rate Limiting |
| Protection: | ESD protection, Output Current Limit and Thermal Shutdown |
| UART | |
| Data rate: | up to 500Kbps |
| Logic level: | 3.3V |
| SPI | |
| Frequency: | up to 80MHz |
| Logic level: | 3.3V |
| I2C | |
| Frequency: | 400kHz |
| Logic level: | 3.3V |
| FLEXBOOL PB
|
FLEXBOOL 3
|
FLEXBOOL 2
|
FLEXBOOL Lite
|
|
| MCU | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency | up to 240 MHz | up to 240 MHz | up to 240 MHz | up to 240 MHz |
| SRAM | 520 KB | 520 KB | 520 KB | 520 KB |
| ROM | 448 KB | 448 KB | 448 KB | 448 KB |
| FLASH | 16MB | 16MB | 16MB | 16MB |
| Real Time Clock | X | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz |
| Display | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) |
| SD Memory Card | ✓ | ✓ | ✓ | ✓ |
| UPS Battery Charger | X | ✓ | X | ✓ |
| EXT Connector (Top) | X | ✓ | ✓ | ✓ |
| Pluggable Terminals | ✓ | ✓ | ✓ | ✓ |
| USB-C | ✓ | ✓ | ✓ | ✓ |
| Power BUS Extenders | ✓ | X | X | X |
| RS485 | ✓ | ✓ | ✓ | ✓ |
| UART | ✓ | ✓ | ✓ | ✓ |
| Ethernet | ✓ | ✓ | ✓ | ✓ |
| WiFi | ✓ | ✓ | ✓ | ✓ |
| Bluetooth | ✓ | ✓ | ✓ | ✓ |
| SPI | Internal Only | ✓ | ✓ | ✓ |
| I2C | Internal Only | ✓ | ✓ | ✓ |
| Digital Inputs | 4 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) |
| Analog Inputs | 4 (0-10V) | 8 (0-10V) | 8 (0-10V) | 8 (0-10.0V) |
| Thermistor Inputs | on PB Extenders | 8 (1-10k, NTC) | 8 (1-10k, NTC) | X |
| RTD Inputs | on PB Extenders | 8 (PT100, Cu100, Cu50) | X | X |
| Current Inputs | on PB Extenders | 8 (0-25mA) | X | X |
| Digital Outputs | 4 (200mA) | 8 (200mA) | 8 (200mA) | X |
| Relay Outputs | 4 (SPST), 3A | 8 (3xSPDT + 5xSPST), 5A | 8 (3xSPDT, 10A + 5xSPST, 5A) | 8 (3xSPDT + 5xSPST), 5A |
| Analog Outputs | X | 8 (0-10V) | X | X |
| PWM Outputs | X | 8 (0-100%) | X | X |
| DC Outputs | ✓ | ✓ | ✓ | ✓ |
| Channel Indicators | ✓ | ✓ | ✓ | ✓ |
| Process Indicators | X | X | X | 24 (Dual-Color) |
| Dimensions | 54x106x62mm | 160x106x62mm | 107x106x62mm | 160x106x62mm |
| Weight | 190g | 460g | 310g | 380g |
Depending on your location, you can order from our online store, or you can buy from a distributor. In both cases, all our products come with a standard warranty and you receive reliable technical support from our Technical Center. Choose your location to find the best devivery option.
FLEXBOOL Lite
FLEXBOOL Lite provides all features of FLEXBOOL 3, including integrated UPS battery charger and all communication capabilities, but limited I/O standards support. However, it still has 16 inputs (8 DI / 8 AI), 8 independent Relay outputs, SD Card, and Real Time Clock. Additionally, FLEXBOOL Lite has a user-configurable, dual-color Process Indicators. As any other FLEXBOOL controller, FLEXBOOL Lite is based on the dual-core ESP32 processor and fully compatible with Arduino IDE.
24 Inputs/Outputs. Pluggable terminals
Built In Smart Battery Charger (CC, CV, UPS)
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x Relay Outputs (5A)
Voltage reference outputs (3.3V, 5V)
Easy & intuitive programming
No License limitations
Ready to Use program examples
Built In Smart Battery Charger (CC, CV, UPS)
Over-Voltage, Over-Current I/O protection
8 x Digital Inputs (up to 30VDC)
8 x Analog Inputs (0-10V)
8 x Relay Outputs (5A)
Voltage reference outputs (3.3V, 5V)
Easy & intuitive programming
No License limitations
Ready to Use program examples
Dual-Core processor
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED Indicators
Dual-Color Process Indicators
User-configurable panel buttons
EXT / Development boards connector
Integrated Self-Test
Arduino IDE compatible
RS485, UART, SPI, I2C, 1-Wire
USB-C, ETH 10/100Mbs, WiFi, Bluetooth
Real Time clock (60 days backup supply)
SD Memory Card support
Full-color display. Channel LED Indicators
Dual-Color Process Indicators
User-configurable panel buttons
EXT / Development boards connector
Integrated Self-Test
Arduino IDE compatible
| MCU | |
| Model: | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency: | up to 240 MHz |
| SRAM: | 520 KB |
| ROM: | 448 KB |
| FLASH: | 16 MB |
| DIGITAL INPUTS | |
| Number of channels: | 8 (independent) |
| Max. voltage: | 30VDC |
| Protection: | Over-voltage, over-current |
| Interrupts: | Yes |
| ANALOG INPUTS (0-10V) | |
| Number of channels: | 8 (independent) |
| Input range: | 0-10V |
| ADC resolution: | 12 bit |
| Protection: | Over-voltage, over-current |
| Measuring accuracy: | 0.01V (0.05-10V) |
| RELAY OUTPUTS | |
| Number of channels: | 8 (independent) |
| Max. current: | 5A (resistive load) |
| Contact arrangement: | 3xSPDT, 5xSPST |
| Max. Switching Voltage: | 30VDC, 400VAC |
| Operate Time (typical): | 8ms |
| Release Time (typical): | 4ms |
| EXT I/O | |
| Number of channels: | 2 (independent) |
| Logic Level: | 3.3V |
| Protection: | Over-voltage, Over-current |
| Interrupts: | Yes |
| DC OUTPUTS | |
| 5V DC | Protected, 0.5A max. |
| 3.3V DC | Protected, 0.5A max. |
| Vout | Protected, 1A max. |
| * When UPS battery is used, the 5V, 3.3V and Vout are uninterruptible supply outputs. Vout is equal to the PLC Supply voltage (uninterruptible, non-stabilized, over-current protected). | |
| REAL TIME CLOCK | |
| Available Data: | Hours, Minutes, Seconds, Day of Week, Day, Month, Year. |
| Calendar operation: | Auto-adjustment for months with fewer than 31 days and leap years. |
| Oscilator | Crystal, 32.768 kHz |
| BackUp Supply: | Capacitive, up to 10 days |
| POWER SUPPLY | |
| Supply Range: | 11-30VDC |
| Power consumption: | Idle: 1.5W, Max: 3.4W |
| Protection | Over-voltage, reverse polarity |
| * When the UPS battery charger is in use, the PLC power supply voltage must match the battery voltage as follows: 14.4VDC (recommended for 12V battery), or 28.8VDC (recommended for 24V battery). | |
| UPS BATTERY CHARGER | |
| UPS functionality: | Yes |
| Charging Modes: | CC, CV (Norm, Absorb, Equalize) |
| Supported battery types: | Lead-Acid, AGM batteries |
| Battery voltage: | User configurable 12, or 24V | Max. Charging Current: | User configurable 0 to 1.00A |
| Charger Telemetry: | Charging mode & state. All voltage, current & temperature values. |
| Protection: | Over-voltage, over-current, reverse polarity (In/BAT), over-temperature. |
| BATT Temperature Sensor: | NTC 10k, B=3490 (included) |
| SD MEMORY CARD | |
| Card Type: | Micro SD |
| Holder Type: | Push In, Push Out |
| Communication: | SPI |
| Max. Card Capacity: | 16GB |
| DISPLAY | |
| Display Type: | TFT |
| Display Size: | 1.3'' |
| Display Resolution: | 240x240px |
| Color: | Full color (64k) |
| Communication: | SPI |
| Display Controller: | ST7789 |
| ETHERNET | |
| Data rate: | 10/100Mbps (Fast Ethernet) |
| Features: | Auto-negotiation, Half/Full Duplex, HP Auto-MDIX Support |
| Ethernet port: | Shielded RJ45. Integrated magnetics. Link Status & 10/100Mbps Indicators |
| WiFi | |
| WiFi Standards: | 802.11b/g/n |
| Features: | WMM, 4 × virtual Wi-Fi interfaces, Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes. |
| Frequency band: | 2.4GHz |
| Data rate: | up to 150Mbps |
| Output power: | up to 20.5dBm |
| BLUETOOTH | |
| Protocols: | Bluetooth v4.2 BR/EDR and BLE |
| Receiver: | NZIF with –97dBm sensitivity |
| Transmitter: | Class-1, class-2 and class-3 |
| RS485 | |
| Data rate: | up to 500Kbps |
| Features: | Auto Direction Control, Enhanced Slew-Rate Limiting |
| Protection: | ESD protection, Output Current Limit and Thermal Shutdown |
| UART | |
| Data rate: | up to 500Kbps |
| Logic level: | 3.3V |
| SPI | |
| Frequency: | up to 80MHz |
| Logic level: | 3.3V |
| I2C | |
| Frequency: | 400kHz |
| Logic level: | 3.3V |
| MECHANICAL | |
| Dimensions: | 160x106x62mm |
| Enclosure: | ABS, Grey RAL 7035 |
| Terminals: | Pluggable, 0.4Nm, 2.5mm2 max. |
| Mounting: | DIN Rail (EN 60715) |
| Weight: | 380g |
| Impact resistance: | IK07(EN 62262) |
| Shock resistance: | 80m/s2 X, Y, Z directions, 2 times |
| ENVIRONMENTAL | |
| Storage temperature: | -30 – 65 o C |
| Operation temperature: | -20 – 60 o C |
| Operation humidity (25 o C): | 10 – 85%RH, non-condensing |
| FLEXBOOL PB
|
FLEXBOOL 3
|
FLEXBOOL 2
|
FLEXBOOL Lite
|
|
| MCU | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 | Dual-Core, 32-bit Xtensa LX6 |
| Clock frequency | up to 240 MHz | up to 240 MHz | up to 240 MHz | up to 240 MHz |
| SRAM | 520 KB | 520 KB | 520 KB | 520 KB |
| ROM | 448 KB | 448 KB | 448 KB | 448 KB |
| FLASH | 16MB | 16MB | 16MB | 16MB |
| Real Time Clock | X | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz | Crystal Oscliator, 32.768 kHz |
| Display | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) | 1.3'' TFT (64k) |
| SD Memory Card | ✓ | ✓ | ✓ | ✓ |
| UPS Battery Charger | X | ✓ | X | ✓ |
| EXT Connector (Top) | X | ✓ | ✓ | ✓ |
| Pluggable Terminals | ✓ | ✓ | ✓ | ✓ |
| USB-C | ✓ | ✓ | ✓ | ✓ |
| Power BUS Extenders | ✓ | X | X | X |
| RS485 | ✓ | ✓ | ✓ | ✓ |
| UART | ✓ | ✓ | ✓ | ✓ |
| Ethernet | ✓ | ✓ | ✓ | ✓ |
| WiFi | ✓ | ✓ | ✓ | ✓ |
| Bluetooth | ✓ | ✓ | ✓ | ✓ |
| SPI | Internal Only | ✓ | ✓ | ✓ |
| I2C | Internal Only | ✓ | ✓ | ✓ |
| Digital Inputs | 4 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) | 8 (up to 30VDC) |
| Analog Inputs | 4 (0-10V) | 8 (0-10V) | 8 (0-10V) | 8 (0-10.0V) |
| Thermistor Inputs | on PB Extenders | 8 (1-10k, NTC) | 8 (1-10k, NTC) | X |
| RTD Inputs | on PB Extenders | 8 (PT100, Cu100, Cu50) | X | X |
| Current Inputs | on PB Extenders | 8 (0-25mA) | X | X |
| Digital Outputs | 4 (200mA) | 8 (200mA) | 8 (200mA) | X |
| Relay Outputs | 4 (SPST), 3A | 8 (3xSPDT + 5xSPST), 5A | 8 (3xSPDT, 10A + 5xSPST, 5A) | 8 (3xSPDT + 5xSPST), 5A |
| Analog Outputs | X | 8 (0-10V) | X | X |
| PWM Outputs | X | 8 (0-100%) | X | X |
| DC Outputs | ✓ | ✓ | ✓ | ✓ |
| Channel Indicators | ✓ | ✓ | ✓ | ✓ |
| Process Indicators | X | X | X | 24 (Dual-Color) |
| Dimensions | 54x106x62mm | 160x106x62mm | 107x106x62mm | 160x106x62mm |
| Weight | 190g | 460g | 310g | 380g |
Depending on your location, you can order from our online store, or you can buy from a distributor. In both cases, all our products come with a standard warranty and you receive reliable technical support from our Technical Center. Choose your location to find the best devivery option.